Welcome to our blog! Are you in need of some help on constructing a closet? Well, you’ve come to the right place. This blog post will give you some useful know-how on how to construct your perfect closet. You’ll find step-by-step instructions on materials, measurements, and all the other details that go into constructing a closet. We want to make sure you have all the information you need to get started and make the most of this DIY project. Let’s get started!
Table of Contents
- 1. Gathering Your Materials for Constructing a Closet
- 2. Planning the Layout of Your Closet
- 3. Installing the Wall Supports for Your Closet
- 4. Assembling the Closet Shelves and Frames
- 5. Choosing and Placing Your Closet Doors
- 6. Adding Accessories and Closet Organizers
- 7. Finishing Touches to Make Your Closet Perfect!
- Q&A
1. Gathering Your Materials for Constructing a Closet
So, you’ve decided it’s time to build a closet and give your room that extra storage space it needs. It may seem intimidating, but creating a closet isn’t all that difficult. Here’s what you’ll need to get started:
- Plywood – you’ll need 8 feet of 0.75 inch plywood for the backboard and shelves
- Studs – You’ll need 20 feet of 2×4 lumber for the walls and top
- Molding – you’ll need some molding to finish the edges along the top and left/right sides
- Precut shelves – precut shelves will make things a bit easier and save you some time
- Hanging Rod – you’ll need an adjustable, double-hang rod
- Hardware – this includes screws, nails, and any additional fasteners you’ll need for mounting and construction
- Adhesives – these will be used for attaching the backboard and shelves
- Doors – if you’d like to add doors to your closet, you’ll need to factor in this additional material
- Paint / Material – depending on your desired look for the closet, you’ll need a finish that matches the surrounding areas
If you prefer to have your shelves cut to size and pre-drilled, consider ordering custom cut shelving material from your local big box home improvement store. This can also help save time in the construction process.
It’s important to consider the total space plan for the area in which the closet will be constructed. Take accurate measurements to ensure everything fits properly. Measure twice, cut once!
2. Planning the Layout of Your Closet
When you begin , there are several things to consider. First, determine how much space you have to work with and measure the length, width, and height of the room. Once you’ve done this, it’s time to think about what you’d like to get out of the closet. Would you like to maximize storage, incorporate hanging racks or shelves, or modular components?
Once you’ve come up with some ideas of what you would like to incorporate, create a space plan that you can use to figure out the components you will need. Here are a few tips to keep in mind when planning your closet space:
- Maximize Storage: Consider your storage needs, including bins, baskets, shoe racks, and folded garments, when designing your closet.
- Create Flexible Storage: Think ahead about the items you may want to store in your closet in the future and allow some extra room in your design for expansion.
- Find the Right Balance: Be sure to incorporate hanging racks and shelves for storage but don’t forget about making the closet attractive and comfortable for everyday use.
When you’ve perfected your design and are ready to begin construction, think about your budget and decide what components and features you can afford. If you are looking for additional storage solutions, there are many versatile organizers you can purchase or construct yourself. The key is getting creative and making sure the design you have chosen will meet your storage needs now and in the future.
3. Installing the Wall Supports for Your Closet
.
Now that your closet frame is built, it’s time to add the wall support pieces. If you’re working on a wooden closet system, you’ll need two wall support pieces. Along with the top and bottom sections, the wall support pieces will provide the stability your closet needs to withstand the weight of your belongings.
Tools You’ll Need:
- Drill
- Wood Screws
- Hacksaw
- Level
Step 1: Measure the Wall Supports
Measure the support pieces and cut them to the appropriate size with a hacksaw. You’ll want to cut the pieces so that they fit snugly between the top and bottom frame of the closet.
| Measurement | Length |
|---|---|
| Support 1 | 24″ |
| Support 2 | 48″ |
Step 2: Attach the Wall Support to the Frame
Now that you have your wall support pieces cut, it’s time to attach them to the frame. Using the drill and wood screws, secure the wall support pieces to the frame. Make sure that the screws go into the wall and frame securely. If you have a studded wall, use longer screws to ensure adequate support.
Step 3: Level the Wall Supports
Use a level to make sure your wall supports are level and secure. Make any necessary adjustments before you continue with the construction of the closet.
4. Assembling the Closet Shelves and Frames
You can follow these steps to assemble the closet shelves and frames:
- Lay the floor track in position against the walls.
- Connect each bracket to the floor track.
- Attach the shelf frames to the wall brackets.
- Secure the shelf frames to the wall bracket using screws.
- Position the shelf frames at the desired length.
For added support, you can use screws to attach the frames to the walls, beams, and headers. Be sure to use the right drill bit for the screws. Improper drilling can damage the wood and weaken the frame. To finish the job, attach the shelves to the shelf frames. Lastly, add shelf covers to the sides and bottom of the shelves to give the closet a cleaner, finished look.
It is important to use the appropriate tools when building a closet. For instance, a hammer is needed to drive the nails into the wall and a drill is necessary for securing the shelf frame to the wall. Take the time to select the right tool for the job so that the closet is properly assembled.
5. Choosing and Placing Your Closet Doors
.
Now that you’ve taken the measurements and designed the closet you need, choosing and placing the doors is an important step. You have to find a door that fits both purpose and space. Also consider the material that’s right for you:
- Sliding Doors – are perfect for tight spaces as they require no additional floor space for them to open and shut. They normally come in wood, glass, and mirrored options.
- Hinged Doors – are usually built with wooden frames and various types of panels. Some hinged closet doors require minimal floor space, while others take up more floor space when open.
- Bypass Doors – are composed of two doors that slide on a track and tie in with the styling of traditional sliding doors. They take up some additional wall space, so make sure to account for that in your measurements.
When deciding on the placement of the door, make sure to check if the door is installed correctly. Start by checking the hinge side of the door and measure the space between the top of the door and the header board. There should be a ⅜” clearance there. Then move on to the latch side and make sure either the latch plate lines up with the doorjamb or the latch plate and the door handle are in the same position. If the handles or plates aren’t flush, adjust the strike plate to fit properly.
| Door Type | Floor Space Needed |
|---|---|
| Sliding | None |
| Hinged | Minimal-More |
| Bypass | More Wall Space |
After properly installing the doors, make sure to take a few minutes to test them. Open and close them several times to check that they open and close smoothly and latch properly. You should also check that the doors are slightly raised above the floor so they don’t interfere with the space’s ability to maintain air circulation. And with that you’ve completed the closet construction process!
6. Adding Accessories and Closet Organizers
for Maximum Usage.
Accessories can be a great way to add extra storage for items in your closet. Consider adding hooks, shelves, and boxes to store items such as scarves, jewelry, hats, and purses. Basic hardware and some woodworking skills are usually all you need to get the job done. You can also purchase pre-made closet organizers that easily fit into any closet.
Closet organizers are a convenient way to organize your closets. They can come in a variety of shapes and sizes to fit your needs and can add extra storage. There are also more specific types designed to store ties, belts, and scarves. Not only do organizers make closet items easy to access, but they also decrease clutter and create space for more items to be stored.
Let’s look at a few tips for ordering closet organizers:
- Measure the closet: Make sure to measure the height and length of the closet before ordering a new closet organizer to ensure it fits properly.
- Identify the purpose: Pick the type of organizer based on the items you plan to store in it.
- Consider ease of use: Think about how easy it is to use the organizer and how it will fit in your lifestyle.
To summarize, accessories and closet organizers can make your closet more organized and efficient. Accessories such as hooks, shelves, and boxes are great for smaller items, while specific organizers can save on space and time. Make sure to measure the closet before ordering a new closet organizer and consider the items you will be storing in the new organizer.
7. Finishing Touches to Make Your Closet Perfect!
Making sure your closet is perfect doesn’t have to be a hassle! With just a few finishing touches, you can make sure your closet is neat, organized, and looks great. Here are some tips to help you finish your closet:
- Add Storage Containers: Nothing keeps a closet organized like storage containers. Invest in some cloth, wicker, or plastic containers to hold your everyday items such as jewelry, hats, belts, and scarves.
- Update Your Closet Doors: If you have an old closet in need of some love, start with updating the doors. You could paint the doors, add fabric or mirrors, or switch out your simple knob with a nicer door handle for an inexpensive and easy makeover.
- Use Multiple Rod Lengths: For items that need to be hung up, such as dresses and suits, use different lengths of rods to fit your closet’s specific needs. A double-hang rod is great for saving space and reducing clutter.
- Label!: Taking the time to label shelves and bins will help keep your closet tidy and organized over time. Plus, you won’t have to worry so much about searching for items when you forget where they are!
Keep in mind that the more organized and tidy your closet is, the easier it will be to dress in the morning. Try to make a habit of tidying up and grouping items together. Finally, consider adding some decorative pieces, such as a rug, artwork, or photo frames, to give your closet a more welcoming and finished look.
Q&A
Q: What type of materials do I need to build a closet?
A: You’ll need some basic supplies for constructing a closet. You’ll need wood for the shelves, frames, and any extra supports. You’ll also need screws, nails, wood glue, and brackets for installation. If you’re going to use drywall for the walls, you’ll also need drywall screws and corner beads. You should have these supplies ready before you begin.
Q: What tools do I need to build a closet?
A: You’ll need some basic tools, such as a saw, drill, level, hammer, tape measure, and screwdriver. You may also need a jigsaw and/or a circular saw, depending on the type of cuts you’ll need to make. Additionally, you may want to pick up a few other tools to make the job easier, such as a chalk line, straightedge, clamps, and sandpaper.
Q: How do I install the closet in my room?
A: To install your closet in your room, you’ll need to measure the space and ensure that the shelves, frames, and other components you’ll be using are the appropriate size. You’ll also need to ensure that the closet will be structurally sound and secure once installed. Once you’ve verified the measurements, you can follow the instructions for the specific type of closet that you’re constructing.
Q: What should I do if I’m having trouble with the installation?
A: If you’re having difficulty with any part of the installation process, you may want to hire a professional to do the work for you. If you’re feeling confident in your abilities, there are plenty of online resources and videos you can watch to help guide you step-by-step through the process. Additionally, you may find it helpful to enlist the help of a friend or family member to assist you.
We hope this “” article gave you some helpful tips and tricks to start your own DIY project. Building your own closet is not only rewarding but can save you money. So don’t be afraid to tackle a project like this, you’ll be amazed at what you can create with some time and effort. Good luck!